Stress intensity factors and crack deviation conditions in a brittle anisotropic solid

For arbitrary anisotropy in the linear manifold of singular solutions generating square-root singularities of the crack tip stress, a special basis is introduced that possesses the same properties as in the isotropic case and provides simple integral representations for the attributes of the energy fracture criterion, in particular, the conditions of crack deviation from a straight path. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 3, pp. 98–107, May–June, 2005.     

Two-Dimensional Magnetoelastic Problem for a Multiply Connected Piezomagnetic Body

A general method based on complex variable theory is proposed to determine the magnetic and elastic fields of a piezomagnetic body. This method is used to derive the basic relations for complex potentials in the two-dimensional problem of magnetoelasticity, their general representations for a multiply connected domain, expressions for stresses, displacements, vectors of magnetic field intensity and magnetic flux density, and magnetic field potential. A closed-form solution is obtained for a body with an elliptic (circular) hole or crack subjected at infinity to the action of a constant magnetoelastic field. Numerical results for a piezomagnetic plate with a circular hole are presented __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 10, pp. 64–74, October 2005.     

Interfacial crack between elastic half-spaces under harmonic loading

A system of boundary integral equations that allows evaluating the displacement and stress fields for an interfacial crack under harmonic loading is presented. Expressions for the integral kernels are obtained. A numerical solution for a penny-shaped crack between steel and aluminum half-spaces under normally incident compression-rarefaction wave is given __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 8, pp. 47–56, July 2007.     

Modélisation de fissures elliptiques internes par hybridation de fonctions de poidsEmbedded elliptical cracks modeling with hybridization of weight functions

A method improving the evaluation of the stress intensity factor by hybridization of two weight functions is presented and applied to embedded elliptical cracks under various loadings. The hybridization consists in using one or the other function in the zone of the crack where it is the most efficient. The delimitation of the two zones is achieved after optimizing the axes ratio and the curvature radius of the crack. During this optimization we seek to reduce the effects of the singularities present in the weight functions as well as to take better into account the influence of the ellipse curvature. To cite this article: B. El Khalil Hachi et al., C. R. Mecanique 334 (2006).     

残余应力对压力容器破坏模式的影响分析

破前漏(简称LBB)是压力容器、核电站设备结构设计与评价中的一个重要准则.表面裂纹准静态扩展的几何形貌变化规律的预测是破前漏(LBB)评判十分重要的课题之一.本文对特定焊接残余应力场加载作用下,含三维表面裂纹的压力容器模型,用有限元软件(ABAQUS)进行了表面裂纹准静态扩展模拟计算,得到在此残余应力场作用下应力强度因子沿裂纹前缘的分布规律.结合外载引起的应力强度因子,就可以判别裂纹的扩展形貌,从而判断结构是否满足LBB要求.     

含环向表面裂纹圆柱壳的波传播特性研究

研究了振动波在含有环向表面裂纹的无限长圆柱壳中的传播特性.圆柱壳体的振动用Flügge方程来描述.运用线弹性断裂力学的理论,考虑到裂纹的张开、滑移和撕裂3种模式以及它们相互之间的耦合,利用分布的线弹簧来模拟裂纹并建立了裂纹所在区域的局部柔度矩阵,得到由此引起的附加位移和壳体中内力之间的关系.在入射波已知的情况下,根据裂纹两侧区域的位移和内力的连续性条件得到了反射和透射波的幅值系数.分析了入射波通过裂纹后的透射、反射系数与激励频率和裂纹尺寸之间的关系.为基于振动功率流方法识别圆柱壳表面损伤提供了理论基础.     

半平面多边缘裂纹反平面问题的奇异积分方程

利用复变函数和奇异积分方程方法,求解弹性范围内半平面多边缘裂纹的反平面问题．提出了满足半平面边界自由的由分布位错密度表示的单边缘裂纹的基本解,此基本解由主要部分和辅助部分组成．将半平面多边缘裂纹问题看作是许多单边缘裂纹问题的叠加,建立了一组Cauchy型奇异积分方程．然后,利用半开型积分法则求解该奇异积分方程,得到了裂纹端处的应力强度因子．最后,给出了几个数值算例．     

压电压磁复合材料中裂纹对反平面简谐弹性波的散射问题

分析了压电压磁复合材料中裂纹对反平面简谐弹性波的散射问题。利用傅立叶变换,使问题的求解转换为对一对以裂纹表面上的位移差为未知变量的对偶积分方程的求解。为了求解对偶积分方程,把裂纹面上的位移差展开为雅可比多项式形式,进而得到了裂纹长度、入射波波速及入射波频率对裂纹应力强度因子的影响。从数值结果可以看出,压电压磁复合材料中可导通裂纹的反平面问题的动应力奇异性与一般弹性材料中的反平面断裂问题动应力奇异性相同。     

孔洞裂纹问题的一种数值方法

研究孔洞与裂纹的相互作用问题,通过把适于单一裂纹的Bueckner原理扩充到含有多孔洞多裂纹的一般体系,将原问题分解为承受远处载荷不含裂纹不含孔洞的均匀问题,和在远处不承受载荷但在裂纹面上和孔洞表面上承受面力的多孔洞多裂纹问题.于是,以应力强度因子作为参量的问题可以通过考虑后者来解决,而利用笔者提出的杂交位移不连续法,这种多孔洞多裂纹问题是容易数值求解的.算例说明该数值方法对分析平面弹性介质中孔洞与裂纹的相互作用既简单又有效.     

EFFECTS OF DISLOCATION CONFIGURATION, CRACK BLUNTING AND FREE SURFACES ON THE TRIGGERING LOAD OF DISLOCATION SOURCES

The effects of dislocation configuration,crack blunting and free surfaces on the triggering load of dislocation sources in the vicinity of a crack or a wedge tip subjected to a tensile load in the far field are investigated.An appropriate triggering criterion for dislocation sources is proposed by considering the configurational forces acting on each dislocation.The triggering behaviors of dislocation sources near the tips of a crack and a wedge are compared.It is also found that the blunting of crack tip and the presence of free surfaces near the crack or the wedge have considerable influences on the triggering load of dislocation sources.This study might be of significance to gaining a deeper understanding of the brittle-to-ductile transition of materials.